So I pulled everything off the shelf to give this a test. Its working. What I have done in the pictures below was to use an DDS vfo as the incoming 7mhz signal. It run into as much attentuator as I have here, giving a final signal out of about -95dbm or there abouts according to the spec-an. This number is rather uncertain because that is right on the noise floor of the device and by my calculations, the actual signal is closer to -100dbm. Now I am still hearing a signal out of the speaker at that level. So its not an Icom, but its not totally deaf either. I do think i could use a little more gain in the audio stages. But, we will see how things pan out with some loudish signals on 40m this afternoon.