This is a bit of a redux. The fixed boards arrived today and I was able to build it using the correct value resistors. Got a nice and neat -40db of attenuation and being that the resistors in the top half of the divider are 1w, it should be able to deal with some power being put though it. Its pretty much overkill for the 100 to 200w that I will be playing with, but hey, the through trace will burn out before those resistors will. HAHA. Gain is rather flat to 30mhz. Beyond that, it increases, not sure why that is the case. But, i only do HF so its good enough for the kinds of girls I go out with.