40m DC RX Continued

So i finished of wiring the receiver up and putting power and an antenna on it and having a tune about. Well it works, I was receiving the Manly Warringah radio club doing an open night for the cubs, where the cubs were sending their names back and forth using the phonetic alphabet. The kids were having fun and enjoying the radio. Also, a number of Japan and Indonesian stations were copied as well as some VK3 and 5 stations on CW. All in all, I am happy with the radio other than the finicky tuning system.

img_20161026_182821

This is how i had the receiver setup on the bench for its initial test.

img_20161027_183021

Did not plan the internal layout all that smartly, but it did fit in there eventually.

img_20161027_183003

And it looks all pretty with its nobs on.

40m DC Rx

Facebooktwittergoogle_plusredditpinterestlinkedin

9mhz IF Filter

9mhz_if_schematic
What to do when bored? Experiment with some bits you have sitting about of course. Its been so long since i have experimented just for the sake of experimenting. So in many designs you see the 4 crystal ladder filter with various value capacitors of the same value. So i grabbed 4 9mhz crystals out the parts box and some 100pf capacitors and soldered them up in the ugly style. Connected up the signal generator and scope and began to plot out the shape of the filter.

img_20161021_120521
The basic setup.

9mhz-if-filter

With 100pf caps a filter with about 900Hz -3Db width, not sure why the right hand side is not a smoother curve, i probably need to match impedance’s and use better quality caps.

9mhz-if-filter-2k

Next i changed the capacitor values to 50pf, and plotted out the filter shape again, this time converting millivolts to Db to see what sort level of attenuation is being achieved, and after some stuffing about to get my math right, this is what i ended up with, well 3rd times a charm, to get the math right HIHI. Kind of looks like a filter now and not a Mr Squiggle drawing.

 

img_20161020_173841
The test setup.

Facebooktwittergoogle_plusredditpinterestlinkedin

Ted Powell Memorial DX Contest.

The Ted Powell Memorial DX Contest is a contest run by the Fishers Ghost Radio Club in memory of Ted Powell VK2AU now silent key, who was an avid DXer who worked 301 DXCC with 300 confirmed. The contest runs each calendar quarter with the object to for entrants to work the 5 rarest dxcc they possibly can.

I found the format to be interesting and decided to put in an entry just for the fun of it and was very surprised to receive a 3rd place for working 5 pacific island stations, Tuvalu, Solomon Islands, Norfolk Island, Niue and Marshall Islands.

A big thanks to club and those who run the contest, and if you would like to enter the contest yourself, here is a link to their website. http://www.vk2au.org/#Results

ted_powell_award

Facebooktwittergoogle_plusredditpinterestlinkedin

40m DC Rx

So today we start on the next project in the series, a 40m direct conversion receiver to mate up with the 40m cw transmitter i built previously. I will update this post as I make progress.

img_20161010_142825

What we are starting with.

img_20161010_150251

Diodes in.

img_20161010_151650

Electrolytic capacitors in, kind of an upside down way of kit building, but i am looking to add in some landmarks because of the lack of silk screen on this kit.

img_20161010_152918

Without a silk screen it is a good idea to lay the components out on the board layout I think. HIHIimg_20161010_165811

Capacitors all in.

img_20161010_195625

There was some resistance, but i overcome it in the end.

img_20161010_202614

Most things now on the board. Next job is to wind the toriods and add wires where the power and speaker sockets go.

Facebooktwittergoogle_plusredditpinterestlinkedin

CW: The Mode For Low Power Stations

So I was doing some log maintenance and uploading logs to all the essential services, LOTW, EQSL, Club Log and while i was looking at club log, I noticed that as far as the DX i work goes, it is predominately using CW. I figure that due to the inherent efficiency of the mode, those of us with low power stations and less than ideal antenna situations, have a better chance of working DX than if we are using Phone only.

And when i look over some of those Pacific Island DXpeditions that have taken place over the last month or so, I have not heard them on Phone and they have been weakish even on CW, but I have still managed to get in the log even when they have had substantial pileups going, just by listening and working out where the operators are listening to the pileup. In this instance, with CW skill over brute force wins every time. And in a phone pileup I get swamped, but in a CW pileup, i can spend 20 mins finding just the right frequency to call on and be heard over the bigger stations calling either side of it.

club_log

Facebooktwittergoogle_plusredditpinterestlinkedin